# SMD resistor code 105- Value in ohms, formula

If you are searching for the value of **SMD resistor code 105** value then you can check image using with code shown below.

Now,

SMD resistors, in general, have marks on it. There is 3 coding system for smd resistance:

- 3 digits SMD resistor coding system.
- 4-digit SMD resistors coding system
- EIA96 SMD resistors coding sys.

## A surface mount device with 105 code shown below with code:

The formulae to calculate the value of smd resistor code of 3-digit,

Lets the digits on smd resistor be XYZ then,

The first 2 digit in the code showing the significant digits, and the third at the right end is a multiplier digit. This system is same to the resistor colour code used in cylindrical carbon resistor large size you knew. Here, simply decimal numbers are used instead of colors.

## For calculating smd resistor code 105,

**Here,** X = 1 (1st digit in the code)

Y = 0 (2nd digit)

Z = 5 (3rd multiplier digit )

105 → 10 × 10^{5} Ω

→ 10 × 100000Ω

→ **1 MΩ **

So, it is a** 1MΩ** resistor code 105 smd resistor. Checking this three-digit code you can not infer the power ratings of a resistor so you have to refer the datasheet by the part manufacturer/ supplier. The SMD device *size* depends primarily on the specified power ratings.

also check smd resistor code 100