SMD resistor code 100 – Value in Ohms & formula.
If you are looking for the value of SMD resistor code 100 in ohms then you can check image along with code below.
The value of SMD resistor code 100 is 10 Ohms. Check why?
Now,
SMD resistors generally have markings on it. There are 3 coding system of smd resistance:
- 3 digits SMD resistor coding system.
- 4 digits SMD resistor coding sys.
- EIA96 SMD resistors coding sys.
The surface mount device shown below with code 100:
Lets the code on smd resistor be XYZ then, the usual formula to calculate the value of surface mount resistor code,
The first 2 digit in the code specifies the significant digits, and the third one is a multiplier digit. This system is same as that of the resistor colour code used in cylindrical carbon resistor large size we use. Here simply numbers are used instead of colors.
For calculating smd resistor code 100,
Here, X = 1 (1st digit in the code)
Y = 0 (2nd digit)
Z = 0 (3rd multiplier digit in the code)
100 → 10 × 100 Ω
→ 10 × 1Ω
→ 10Ω
So, it is a 10Ω resistor code 100 smd resistor. Checking this three-digit code you can not guess the power ratings of a resistor so you have to refer the datasheet by the part manufacturer/ supplier. The SMD device size depends primarily on the specified power ratings.
