SMD resistor code 151- Value in ohms
If you are searching for the value of SMD resistor code 151 value then take a look at the image.
Surface-mount resistors, in general, have 3 types of code marks on it.
- 3-digit-SMD resistor coding system.
- 4-digit-SMD resistors coding sys,
- EIA96-SMD resistor coding sys.
A surface mount device with 151 code shown below with code:
The formulae to calculate the value of SMD resistor code of 3-digit,
Lets the digit on smd be XYZ then,
The left 2 digits in the code showing the significant digits, and the third at the right side is a multiplier digit. This system is same as the resistor color code used in cylindrical carbon type large size. Here, simple decimal numbers are used in lieu of colors.
The value of SMD resistor code 151 is 150 ohms. Check why?
For calculating smd resistor code 151,
Here, X = 1 (1st digit in the code)
Y = 5 (2nd digit)
Z = 1 (3rd multiplier digit)
151 → 15 × 101 Ω
→ 15 × 10 Ω
→ 150 Ω
So, it is a 150 Ω resistor code 151 smd resistor. By scanning these three-digit code you can not infer the power ratings of a resistor so you have to refer the datasheet by the part supplier. The surface mount device size depends primarily on the specified power ratings.
check 150 ohm resistor color code
